Lifter scale SUW
​
If the weight of the content of waste containers on the bulk is to be determined, a bulk weighing machine is the right solution. The measuring elements are adapted to the bed, regardless of whether comb or arm bed, divided or beam bedding. The weight value of the poured medium is displayed on the on-board computer (weighing terminal) and logged with the printer. A load of up to max. 2 tons. The inclination sensor corrects the weight value at an inclination without the scale being switched off.
Your advantages:
-
-
Ideal for accurate weighing (measurement of total weight before and after emptying - the difference is the result)
-
Cost-effective alternative to a dynamic measurement during emptying
-
Resolution of 2 kg
-
Rapid amortization of investment in waste disposal
-
Spezifications:
-
-
CE compliant
-
Class III & IV, suitable for all commercial goods
-
As gauges up to 2 t, divisions 2/5/10 kg
-
Weighing cells IP68
-
Also suitable for retrofitting
-
Position compensation
-
Illuminated weighing terminal with stainless steel housing
-
Wiegespeicher (list print of all weighings)
-
Number of weighing units adjustable
-
Wiegebeleg - Query Reprinting possible
-
Entry of item, customer number and truck number
-
Entering delivery charges and article prices
-
Tare blockage before weighing pressure
-
The tare weight is retained when the scale is switched off
-
Individual weighing of containers directly during emptying
The tonnages / containers to be emptied are weighed separately by the differential process at the receiving points of the bulk. This allows a more accurate weighing even for smaller weights in the range up to 2 tonnes per container. The weight value of the poured material is displayed on the LCD of the weighing terminal and can be recorded via a print. An optional tilt sensor corrects the weight value when tilted. The weighing scale can be extended with one of our RFID identification systems or GPRS transmission modules, in order to transmit the data in real time to a control center. With our optional filling controller, you can also control / specify the emptying process.
Lifter scale
The bulk weighing machine is conical for comb, composite, arm, split or beam bedding and offers a presiitive alternative to the expensive, service-intensive dynamic scales.
Overhead loader
The overhead loader scale is designed for filling with forks and offers an inexpensive alternative to expensive, service-intensive dynamic scales.
Dynamic lifter scale DYWA
​
As part of the refuse collection system, the KWS dynamic scale is used to determine the filling quantity of 2-wheel and 4-wheel refuse containers. The weighing takes place during the normal emptying process and does not influence the working process. Manual or separate operation of the weighing system is not necessary. The weight is determined dynamically and fully automatically in the background.
Optionally, an RFID reader can be integrated into the bulk to be able to assign the weighed weight to the listed owner of the refuse bin.
The data (weight and RFID number) can be sent to the office via GPRS or via an existing vehicle calculator - or simply stored on an SD card in the simplest case.
Your advantages:
-
< >Ideal for precise single-bin weighingQuick amortizationNo disturbance of the normal emptying process. The lifter goes throughNo direct operation necessary. Fully automatic system
Technical data:
The dynamic weighing system consists of the following components
-
< >Display terminalSingle Point Weighing Cells IP68Weighing module / weighing machineProximity sensorsOptional RFID reader with antennasOptional printer, SD memory
Details:
-
Calibration class y (b) according to the MID M006 or OIML R51
-
How to calibrate up to 500kg with 1kg and 2kg division
Individual weighing of containers directly during emptying
The tonnages / containers to be emptied are weighed separately by the differential process at the receiving points of the bulk. This allows a more accurate weighing even for smaller weights in the range up to 500 kg per container. The weight value of the poured material is displayed on the LCD of the weighing terminal and can be recorded via a print. An optional tilt sensor corrects the weight value when tilted. The weighing scale can be extended with one of our RFID identification systems or GPRS transmission modules, in order to transmit the data in real time to a control center. With our optional filling controller, you can also control / specify the emptying process.