+
If the weight of the content of waste containers on the bulk is to be determined, a bulk weighing machine is the right solution. The measuring elements are adapted to the bed, regardless of whether comb or arm bed, divided or beam bedding. The weight value of the poured medium is displayed on the on-board computer (weighing terminal) and logged with the printer. A load of up to max. 2 tons. The inclination sensor corrects the weight value at an inclination without the scale being switched off.
Spezifications:
The tonnages / containers to be emptied are weighed separately by the differential process at the receiving points of the bulk. This allows a more accurate weighing even for smaller weights in the range up to 2 tonnes per container. The weight value of the poured material is displayed on the LCD of the weighing terminal and can be recorded via a print. An optional tilt sensor corrects the weight value when tilted. The weighing scale can be extended with one of our RFID identification systems or GPRS transmission modules, in order to transmit the data in real time to a control center. With our optional filling controller, you can also control / specify the emptying process.
The bulk weighing machine is conical for comb, composite, arm, split or beam bedding and offers a presiitive alternative to the expensive, service-intensive dynamic scales.
The overhead loader scale is designed for filling with forks and offers an inexpensive alternative to expensive, service-intensive dynamic scales.
As part of the refuse collection system, the KWS dynamic scale is used to determine the filling quantity of 2-wheel and 4-wheel refuse containers. The weighing takes place during the normal emptying process and does not influence the working process. Manual or separate operation of the weighing system is not necessary. The weight is determined dynamically and fully automatically in the background.
Optionally, an RFID reader can be integrated into the bulk to be able to assign the weighed weight to the listed owner of the refuse bin.
The data (weight and RFID number) can be sent to the office via GPRS or via an existing vehicle calculator - or simply stored on an SD card in the simplest case.
The dynamic weighing system consists of the following components
Details:
The tonnages / containers to be emptied are weighed separately by the differential process at the receiving points of the bulk. This allows a more accurate weighing even for smaller weights in the range up to 500 kg per container. The weight value of the poured material is displayed on the LCD of the weighing terminal and can be recorded via a print. An optional tilt sensor corrects the weight value when tilted. The weighing scale can be extended with one of our RFID identification systems or GPRS transmission modules, in order to transmit the data in real time to a control center. With our optional filling controller, you can also control / specify the emptying process.